The story

TRX250R history

How a three-wheeler engine, a Suzuki rival and a federal lawsuit shaped the most important two-stroke quad Honda ever built.

Last reviewed

Roots: the ATC250R three-wheeler

The 250R story starts on three wheels. Honda's ATC250R arrived for 1981 as the first two-stroke ATC designed specifically for racing, borrowing heavily from Honda's CR250R motocross bikes. A second generation (1983–84) added Pro-Link rear suspension. The third generation (1985–86) got the engine that matters here: a 246 cc liquid-cooled two-stroke single with a 66 × 72 mm bore and stroke, a six-speed gearbox and a gear-driven counterbalancer.

1986: Honda answers the QuadRacer

Suzuki changed the sport in 1985 with the LT250R QuadRacer, a purpose-built, liquid-cooled two-stroke racing quad. Honda answered for the 1986 model year with the TRX250R, marketed as the FourTrax 250R.

Honda reused a lot. The quad took the ATC250R's engine and rear suspension design. Because the four-wheeler was heavier, Honda detuned the engine with lower compression and milder porting to protect reliability. The rest of the package was serious: dual A-arm front suspension with preload-adjustable Showa shocks, a Pro-Link rear with a fully adjustable Showa shock, triple hydraulic disc brakes and a six-speed close-ratio transmission. The 1986 model listed at $2,498.

1987–1988: the three-wheeler era ends

By the mid-1980s, ATV injuries had become a national safety issue in the United States. On December 30, 1987, at the Consumer Product Safety Commission's request, the U.S. Justice Department sued the major ATV distributors (United States v. American Honda Motor Co., D.D.C. No. 87-3525). A preliminary consent decree was filed the same day. The Final Consent Decrees were filed on April 28, 1988 and ran for ten years. Among other things, they required the manufacturers to stop selling new three-wheeled ATVs and to buy back unsold three-wheelers from dealers.

Sport quads were not banned. But the decrees and the liability climate around them changed the market. The ATC250R's last U.S. model year was 1986, which left the TRX250R as Honda's only high-performance two-stroke ATV.

1987–1989: refining the formula

For 1987 Honda lengthened the connecting rod by 5 mm and raised the piston's wrist-pin bore by the same amount, so bore and stroke stayed the same. They also fitted a cylinder with a bridged intake port. That's why 1987–89 engines are called "long rod" engines.

1988 brought the biggest changes. There was a new frame, a shorter aluminum swingarm in place of the gold steel one, revised cylinder porting and intake, and the headlight moved from the handlebars into the front fender. Bigger 22-inch front tires were fitted. Published figures credit the update with cutting roughly 25 lb. Factory data shows the wheelbase went from 1,295 mm to 1,265 mm (51.0 to 49.8 in). The 1988 also stood out visually: it was the only all-red 250R.

1989 was the final year and changed little. Honda added a needle bearing to the clutch pressure plate for smoother clutch action and switched the plastics back to white with red.

The racer's quad

The 250R became the default choice for two-stroke quad racing, from motocross to cross-country. In the early years, racers ran machines that were close to stock. As production-class rules loosened, the aftermarket took over until, by one account, only about half a dozen components on a race 250R had to come from Honda.

The aftermarket that grew around it is probably bigger than for any other ATV. Wayne Hinson of Hinson Racing once said the 250R accounted for sixty percent of his business, against fifteen percent for the next-closest model, the Yamaha Banshee. Some milestones:

  • Clutch baskets: the stock die-cast aluminum basket was a weak point. Gary Denton raced the first aftermarket machined-steel basket in 1989, and Hinson later introduced a billet aluminum design in 1991.
  • Frames: C&J built the first replacement 250R frame in 1991 for CT Racing, keeping stock geometry. JP Racing followed with the first altered-geometry frame, moving the front suspension mounts inward an inch per side so it could run longer A-arms. Steel and aluminum frames from many builders followed, and Lone Star Racing even built a titanium frame, which AMA rules barred from competition.
  • Cylinders: the Pro-X cylinder and head (1994) let builders reach the 300 cc range by changing the cylinder alone. Later cylinder, crank and case combinations went as far as 500 cc, and some aftermarket cylinders added an exhaust power valve, which the stock 250R never had.
  • Transmission: as big-bore engines made more power, the gears became the weak link. A joint venture between Baldwin Motorsports and Timken produced stronger gear sets that let racers run reliably above 330 cc.

Why it ended

The 1989 model was the last TRX250R. Honda never gave a single official reason. The usual explanations are the post-consent-decree liability environment and the high cost of a specialized racing quad in a shrinking market. Later, Honda decided to move away from two-strokes altogether. It announced a plan to phase out two-stroke engines by the end of fiscal 2002, in favor of cleaner four-strokes, to meet emissions and fuel-economy targets.

Honda returned to sport quads with the four-stroke TRX400EX in 1999 and the race-focused TRX450R in 2004. Even then, the 250R's reputation held. Readers of 4-Wheel ATV Action voted it the "ATV of the Century" in 1999, and restored and built 250Rs remain some of the most sought-after machines in the hobby.

Timeline

  1. 1981ATC250R debuts, Honda's first two-stroke ATC designed for racing.
  2. 1985Suzuki launches the LT250R QuadRacer. The ATC250R gets the liquid-cooled 246 cc engine and six-speed gearbox.
  3. 1986The TRX250R FourTrax 250R launches ($2,498). Last U.S. model year for the ATC250R.
  4. 1987"Long rod" engine and bridged-intake cylinder. Yamaha's twin-cylinder Banshee arrives. On December 30, the federal ATV lawsuit and a preliminary consent decree are filed.
  5. April 28, 1988Final Consent Decrees filed: no more new three-wheelers, for a ten-year term. The redesigned 1988 TRX250R has a new frame, aluminum swingarm and all-red plastics.
  6. 1989Final model year. Clutch pressure-plate needle bearing, white plastics.
  7. 1991First aftermarket 250R frame (C&J for CT Racing). Hinson billet clutch basket.
  8. 1994Pro-X cylinder opens the door to 300 cc-class builds.
  9. 1999Honda returns to sport ATVs with the four-stroke TRX400EX. 4-Wheel ATV Action readers name the 250R "ATV of the Century."
  10. 2004Honda's four-stroke TRX450R arrives, built for the class the 250R had ruled.

Sources: Clymer TRX250R/ATC250R service manual (ISBN 0-89287-540-2); Sand Sports (2006) "Long Live the R!" and "Two Decades of 250Rs"; 3Wheeling and ATVSports (1986–87); U.S. CPSC records on the 1988 consent decrees; Honda corporate statements. See sources.