Go faster, stay together
Performance & aftermarket
The 250R has probably the deepest aftermarket of any ATV ever built. Here's how the pieces fit together and the order that makes sense.
Last reviewed
Start with a plan
Decide what the quad is for before you buy parts. A dune machine, a motocross racer, a trail quad and a period-correct vintage racer all need different builds. If you plan to race, read your class rulebook first. Vintage and production classes often limit displacement, frames, suspension and carburetors.
Reliability first. On a machine this old, a fresh top end, sealed crank, good clutch basket, healthy cooling system and correct jetting will do more for you than any single power part. Fix the base before you add power.
Stage 1: bolt-ons
- Expansion chamber and silencer. The pipe has the most influence on a two-stroke's powerband. Pick one designed for your engine spec and riding (low-end and mid for trails and tight tracks, top-end for open terrain and dunes).
- Reed valve. Aftermarket reed cages and petals can sharpen throttle response.
- Air filter and airbox. A quality foam filter, sometimes with the airbox lid opened up. Each change affects jetting.
- Re-jet after every change. See jetting basics.
Stage 2: engine work
- Porting: a skilled two-stroke porter can reshape the powerband to suit the pipe and your riding. Remember that Honda detuned the stock engine from the ATC250R's specification to cope with the quad's extra weight.
- Cylinder head: a modified head or button-style head lets you set compression and squish. More compression usually means you need higher-octane or race fuel. Match the head to the fuel you'll actually use.
- Carburetor: larger PJ and PWK-style carbs are common on modified engines. Bigger isn't automatically better on a stock-displacement trail engine.
- Big-bore cylinders: since the Pro-X cylinder and head of 1994, it's been possible to reach the 300 cc range by changing the cylinder alone. With stroker cranks and modified cases, builders have gone as far as 500 cc. Some aftermarket cylinders add an exhaust power valve, which the stock engine never had.
Stage 3: make the drivetrain survive
- Clutch basket: the original die-cast aluminum basket is the 250R's best-known weak point. Aftermarket machined steel (first raced in 1989) and billet aluminum baskets (Hinson, 1991) solved it. On any modified engine, this should be one of the first upgrades.
- Clutch pressure plate: the 1989 needle-bearing pressure plate is a popular upgrade for earlier models.
- Gears: big-bore engines can break stock gears. Stronger aftermarket gear sets, first from a Baldwin Motorsports and Timken venture, let builders run reliably above 330 cc.
- Gearing: sprocket changes are the cheapest way to change how the quad feels. Model them first in the gearing calculator.
Stage 4: chassis & suspension
- Shocks: modern shocks are a huge upgrade over 35-year-old Showas. Rebuilding the originals is the budget option, and fully adjustable aftermarket shocks are the race option.
- A-arms and spindles: wider or long-travel A-arms improve stability and travel. They usually need longer tie rods, matching shocks and sometimes a different steering stem.
- Rear axle: stronger aftermarket axles and carriers, often in a longer, wider form, are common on race builds.
- Frames: the first aftermarket 250R frame came from C&J in 1991 for CT Racing, using stock geometry. JP Racing's frame was the first to change geometry, moving the front mounts in an inch per side so it could run longer A-arms. Many steel and aluminum frames followed, plus at least one titanium frame, which AMA rules didn't allow.
- Swingarm: fitting a 1988–89 aluminum swingarm to a 1986–87 frame is a known swap, but the early frame has to be modified for it.
Restoration vs. resto-mod
There are two schools. Restorers chase originality: correct plastics for the year, the gold or aluminum swingarm to match, the original headlight setup and factory finishes. Resto-modders keep the classic look and use modern shocks, A-arms, brakes, clutch parts and engine work underneath. Both are valid. Just know that heavy modification usually reduces collector value, and a clean original usually doesn't make a competitive race quad.
Safety. A built 250R can be dramatically faster than stock. Upgrade brakes, suspension and tires to match the power, and wear proper protective gear.