1986 · 1987 · 1988 · 1989

Model years & identification

Honda built the 250R for four model years in two chassis generations. Here's what changed each year and how to work out what you're looking at, even when the parts have been mixed.

Last reviewed

Quick identification chart

Feature1986198719881989
VIN 10th characterGHJK
HeadlightHandlebarHandlebarFront fenderFront fender
SwingarmSteel, goldSteel, goldAluminumAluminum
PlasticsRed/white or blue/whiteRed/white or blue/whiteAll redWhite with red
Front tires21×7-1021×7-1022×7-1022×7-10
Connecting rodOriginal (short)Long rod (+5 mm)Long rodLong rod
Compression7.5 : 17.7 : 17.7 : 17.7 : 1
Carb IDPJ05APJ07APJ07BPJ07B
Stock sprockets13/3913/3913/3813/38
Wheelbase51.0 in51.0 in49.8 in49.8 in
Clutch pressure platePlainPlainPlainNeedle bearing

Original prices: $2,498 for 1986. Later-year MSRPs vary between published sources, so we don't list them.

1986: the original

The first FourTrax 250R used a detuned version of the ATC250R three-wheeler's 246 cc engine, with 7.5:1 compression and milder porting. The chassis had a gold-painted steel swingarm that shared its pivot bolt with the rear engine mount, a handlebar-mounted headlight, and 21×7-10 front tires on 10-inch rims. It came in two color schemes: red/white or blue/white.

1987: the long-rod engine

The 1987 engine has a connecting rod 5 mm longer than the 1986's, and a piston with the wrist-pin bore raised 5 mm so the deck height stays the same. The cylinder gained a bridged intake port, which supports the piston rings as they pass the wide intake window. Bore and stroke stayed at 66 × 72 mm. The chassis was largely carried over, so a 1987 looks almost the same as a 1986. The VIN is the reliable way to tell them apart.

1988: the redesign

This is the biggest change in the 250R's life:

  • New frame with a separate, frame-mounted rear engine mount.
  • Aluminum swingarm, about an inch shorter than the steel one. The wheelbase dropped from 1,295 to 1,265 mm.
  • Steering geometry sharpened: caster went from 6° to 4°40′ and trail from 27 to 21 mm.
  • Revised cylinder and intake, including reworked transfer porting, a larger intake tract and new reeds.
  • Headlight moved from the handlebars into the front fender.
  • 22×7-10 front tires, a taller seat (790 mm) and gearing changed to 13/38.
  • All-red plastics, the only year the 250R came this way.

Published figures credit the redesign with saving around 25 lb.

1989: the finale

The final 250R carried over the 1988 chassis and engine. The main mechanical change was a needle bearing in the clutch pressure plate for smoother clutch action. Many owners fit it to 1988 clutches as an upgrade. The plastics went back to white with red. Factory heel guards are also often cited as a 1989 identifier.

How to identify a 250R

1. Read the VIN first

The frame number is a 17-character VIN that starts JH3TE12. The 10th character is the model year: G = 1986, H = 1987, J = 1988, K = 1989. Honda's factory data lists the stamping location on the frame differently by year: on the left side near the rear fender for 1987, and at the top front of the frame for 1988. Clean the area gently before you read it. The engine has its own serial number on the crankcase, and it may not match the frame if the engine has been swapped.

Decode a VIN now

2. Then check the visual clues

  • Headlight on the bars? That points to a 1986–87 chassis. A headlight in the front fender points to 1988–89.
  • Gold steel swingarm or aluminum? Gold steel is 1986–87 and aluminum is 1988–89.
  • Rear engine mount: on 1986–87 machines it shares the swingarm pivot bolt. On 1988–89 it's a separate mount on the frame.
  • Plastic color is the weakest clue. Plastics are easy to swap and reproductions are everywhere.

3. Expect mixed parts

Most surviving 250Rs have been raced, rebuilt or modified at some point. Cylinders, swingarms, plastics and whole engines get swapped all the time. A 1988-style aluminum swingarm on an early frame is a known conversion, but it isn't a bolt-on: the early frame has to be modified to accept it. If the VIN, the chassis features and the engine don't agree, the VIN tells you what the frame is, and everything else is a story to ask the seller about.

Which year should you buy?

There's no single right answer. Here's how owners usually see it:

  • 1988–89 are generally the preferred stock chassis, with sharper steering geometry, the aluminum swingarm and lower weight. The 1989 adds the clutch bearing. These usually cost the most.
  • 1986–87 often cost less and make a great base for a restoration in the classic red/white or blue/white scheme. A 1987 has the long-rod engine in the early chassis.
  • For a race or resto-mod build, condition and what's already been done matter far more than the year. Many builds end up with an aftermarket frame anyway.

Before buying, read the buyer's guide.